Transfer Station

For the transfer of stoppers the process vessel can be docked directly to the RABS or Isolator of the filling line. Atec is manufacturing lifts for the positioning of the vessel that can be floor or ceiling mounted.

At the RABS or Isolator a Rapid Transfer Port (RTP) is used to connect the process vessel. A transfer chute in the RABS / Isolator is installed to guide the stopper or caps from the process vessel into the bunker from the filling line.

RTP Transfer

The DPTE® port from La Calhéne ensures a secure, sterile transfer and is normally hand-operated by a line worker. When the transfer point is difficult to access or poses safety risks to staff, manual operation is no longer an option. Therefore, Atec fully automated RTP solution enables an automatic transfer connection without intervention from a worker.

 

All Stopper Processing Systems Components

  • Loading Station

    For stopper loading, the process vessel is docked at a cleanroom-lift (Atec Lifting Device – ALD). The lift rotates the vessel to bring it into loading position.
  • Process Station

    The process steps of washing, sterilization, siliconization, drying and cooling are done at the process station.
  • Transfer Station

    For the transfer of stoppers the process vessel can be docked directly to the RABS or Isolator of the filling line. Atec is manufacturing lifts for the positioning of the vessel that can be floor or ceiling mounted.
  • Bag Filling Equipment

    The Atec stopper and cap bag filling systems are used for sterile transfer of pharmaceutical components into bags. Fully automated cleanroom lift systems are utilized to position the vessels filled with sterile components over a VHP transfer isolator or RABS, for sterile stopper or cap distribution into bags.